كتيب مكنسة كهربائية EM5000 Ufesa

كتيب

When the micro-fibre cloth becomes

verywetordirty, replace it with a clean

and dry one.

The micro-fibre cloth becomes very hot

whenusing the steam mop. Use caution

when replacing.

In order to thoroughly sanitize an area of

yourfloor, wait 60 seconds for the unit

to heat up, then mop the selected area

with a short forward and backward motion for

about 15 seconds.

8

After use, slide the calor switch to the o position

and wait until no steam is emitted from the cleaning

head.

9

Empty the water tank and unplug the unit from the

outlet.

After use / Cleaning and maintenance

After use

● When finished steam cleaning, make sure that the

calor switch is in the o position, then unplug the unit

from the outlet.

● Pour out water from the water tank.

● The micro-fibre cloths are machine washable

(atmax. 60°C).

If the cloths are very dirty, before

washingsoakthem in warm water with

some detergent or stain remover.

● Thoroughly dry the cloths before storage.

Replacing the water softening filter

The water softening filter helps to remove minerals

from water which may impact the performance of your

steam mop. How often the filter should be replaced

depends on how hard your water is and how often you

use the unit. We suggest that you replace the water

softening filter every 6months or so.

The degree of filter contamination may

impactthe performance of your steam

mop.

C

Before replacing the filter, unplug the

unitfromthe outlet.

1

Remove the water tank (see the “Steam function”

section

3

).

2

Pull the filter up and remove it from the unit.

3

Replace the used filter with a new one. Press the

new filter so that it touches the unit base closely.

4

Refit the water tank.

Cleaning the electrobrush

Over time pieces of threads, strings, hair,

fabrics, etc accumulate on the roller of

the electrobrush. They impact the

sweeping performance and therefore the roller

should be periodically cleaned (at least once

monthly).

Before cleaning the electrobrush, unplug

theunit from the outlet.

The roller of the electrobrush may be removed for

thorough cleaning.

1

Turn the roller lock located at the bottom of the

cleaning head to the position.

2

Remove the roller lock and the roller from the unit.

3

Using scissors or a sharp knife, carefully clean the

roller of the electrobrush. Using scissors or a sharp

knife, cut hair or threads rolled around the roller.

Be careful no to damage the bristle and

theroller of the electrobrush.

4

When cleaned, refit the roller.

5

Refit the roller lock and turn it to the position.

The roller is now locked.

Disassembling the holder and storing

the unit

The holder is detachable for easy storage of the unit in

low cabinets.

1

Twist the upper cord wrap downwards.

2

Unwind the cord from the wraps.

3

Press the tube lock and slide out the tube with the

holder upwards.

G

E

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ مكنسة كهربائية EM5000 Ufesa الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Ufesa. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل مكنسة كهربائية EM5000 Ufesa الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ مكانس كهربائية Ufesa
المزيد من أدلة مكانس كهربائية

الأسئلة المتداولة حول مكنسة كهربائية EM5000 Ufesa

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

مكنسة كهربائية AC4516 Ufesa

كتيب

مكنسة كهربائية AS5200 Ufesa

كتيب

مكنسة كهربائية AE4415 Ufesa

كتيب

مكنسة كهربائية AC5500 Ufesa

كتيب

مكنسة كهربائية AT9120 Ufesa

كتيب

مكنسة كهربائية AT9220 Ufesa

كتيب

مكنسة كهربائية AT9017 Ufesa

كتيب

مكنسة كهربائية AC2100 Ufesa

فئات ذات صلة