كتيب منشار آركت 4531 GA Skil

كتيب

12

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Always disconnect plug from power source before

making any adjustment or changing any accessory

BEFORE USE

• Remove all obstacles on top of as well as underneath the

cutting path before you start cutting

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

DURING USE

• Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

• Never use the tool when the cord is damaged; it must be

replaced by a specially prepared cord available through

the service organization.

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• Keep hands away from the saw blade while the tool is

in use

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Do not use a saw blade which is cracked, deformed or

dull

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

EXPLANATION OF SYMBOLS ON TOOL

3

Read the instruction manual before use

4

Double insulation (no earth wire required)

5

Do not dispose of electric tools and batteries together

with household waste material

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of this tool,

it must be disposed of safely and not left unattended

USE

• On/o

6

• Switch locking for continuous use

7

• Changing saw blades

8

! insert blade to full depth with teeth facing forward

9

- tool accepts most commonly available T-shank and

U-shank blades

• Sawing at 45°

q

• Adjusting sawing speed to material used

w

- if the tool does not run with wheel C in position 1, select

a higher sawing speed and lower the sawing speed

while the tool runs

• Dust suction

e

- connect vacuum cleaner adapter E to foot

- connect vacuum cleaner hose to vacuum cleaner

adapter E

! do not use vacuum cleaner when cutting metal

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage



power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) 

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR JIG SAWS

• Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord (cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live” and

could give the operator an electric shock)

• Use clamps or another practical way to secure and

support the workpiece to a stable platform (holding

the workpiece by hand or against your body leaves it

unstable and may lead to loss of control)

GENERAL

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Do not work materials containing asbestos (asbestos

is considered carcinogenic)

• This tool should not be used by people under the age of

16 years

• The noise level when working can exceed 85 dB(A); wear

ear protection

• Wear protective goggles when working with materials

which produce chips

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ منشار آركت 4531 GA Skil الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Skil. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل منشار آركت 4531 GA Skil الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ مناشير آركت Skil
المزيد من أدلة مناشير آركت

الأسئلة المتداولة حول منشار آركت 4531 GA Skil

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

منشار آركت 4530 AA Skil

كتيب

منشار آركت 4381 AA Skil

كتيب

منشار آركت 4370 AD Skil

كتيب

منشار آركت 4381 AG Skil

كتيب

منشار آركت 3420 DA Skil

كتيب

منشار آركت 4281 AD Skil

كتيب

منشار آركت 3420 AA Skil

كتيب

منشار آركت 4285 AA Skil

فئات ذات صلة