كتيب فيليبس GC9655 PerfectCare Elite Silence مكواة

كتيب

10 

Problem Possible cause Solution

The ironing

board cover

becomes wet or

there are water

droplets on the

garment during

ironing.

Steam has condensed on the

ironing board cover after a long

ironing session.

Replace the ironing board cover if the foam

material has worn out. You can also add an

extra layer of felt material under the ironing

board cover to prevent condensation on the

ironing board. You can buy felt in a fabric

shop.

You have an ironing board cover

that is not designed to cope

with the high steam rate of the

appliance.

Put an extra layer of felt material under the

ironing board cover to prevent condensation

on the ironing board. You can buy felt in a

fabric shop.



come out of the

soleplate.

The steam that was still present

in the hose has cooled down

and condensed into water. This

causes water droplets to come

out of the soleplate.

Steam away from the garment for a few

seconds.

Steam and/or

water come out

from under the

EASY DE-CALC

knob.

The EASY DE-CALC knob is not

tightened properly.





the EASY DE-CALC knob and screw it back

onto the appliance properly. Note: Some

water may escape when you remove the

knob.

The rubber sealing ring of the

EASY DE-CALC knob is worn.

Contact an authorised Philips service centre

for a new EASY DE-CALC knob.

Dirty water

and impurities

come out of the

soleplate or the

soleplate is dirty.

Impurities or chemicals present

in the water have deposited in

the steam vents and/or on the

soleplate.

Clean the soleplate with a damp cloth.

Too much scale and minerals

have accumulated inside the

appliance.

Descale the appliance regularly (see chapter



The iron leaves

a shine or an

imprint on the

garment.

The surface to be ironed was

uneven, for instance because you

were ironing over a seam or a

fold in the garment.

PerfectCare is safe on all garments. The shine

or imprint is not permanent and will come



over seams or folds or you can place a cotton

cloth over the area to be ironed to avoid

imprints at seams and folds.

The appliance

does not produce

any steam.

There is not enough water in

the water tank (the ‘water tank







The appliance is not hot enough

to produce steam.



lights up continuously.

You did not press the steam

trigger.

Press the steam trigger and keep it pressed

while you iron.

The water tank is not placed in

the appliance properly.

Slide the water tank back into the appliance



التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ فيليبس GC9655 PerfectCare Elite Silence مكواة الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Philips. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل فيليبس GC9655 PerfectCare Elite Silence مكواة الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ مكاوي Philips
المزيد من أدلة مكاوي

الأسئلة المتداولة حول فيليبس GC9655 PerfectCare Elite Silence مكواة

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

فيليبس GC4887 مكواة

كتيب

فيليبس PSG3000 مكواة

كتيب

فيليبس GC8641 مكواة

كتيب

فيليبس GC3803 مكواة

كتيب

فيليبس GC7831 مكواة

كتيب

فيليبس DST7061 مكواة

كتيب

فيليبس GC4549 مكواة

كتيب

فيليبس GC9620 مكواة

فئات ذات صلة