كتيب Philips GC3531 مكواة

كتيب

ENGLISH

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benet from the support that Philips offers,

register your product at www.philips.com/welcome.

Important

Read this user manual carefully before you use the

appliance and save it for future reference.

Danger

Never immerse the iron in water.

Warning

Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

Do not use the appliance if the plug, the mains cord

or the appliance itself shows visible damage, or if the

appliance has been dropped or leaks.

If the mains cord is damaged, you must have it

replaced by Philips, a service centre authorised by

Philips or similarly qualied persons in order to avoid

a hazard.

Never leave the appliance unattended when it is

connected to the mains.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Do not let the mains cord come into contact with

the hot soleplate of the iron.

Caution

Only connect the appliance to an earthed wall

socket.

Check the mains cord regularly for possible damage.

The soleplate of the iron can become extremely hot

and may cause burns if touched.

When you have nished ironing, when you clean the

appliance, when you ll or empty the water tank and

also when you leave the iron even for a short while:

set the steam control to position 0, put the iron on

its heel and remove the mains plug from the wall

socket.

Always place and use the iron on a stable, level and

horizontal surface.

Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

This appliance is intended for household use only.



This Philips appliance complies with all standards

regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user

manual, the appliance is safe to use based on scientic

evidence available today.



A Spray nozzle

B Filling opening with cap

C Steam boost button ( 9)

D Spray button ( 8)

E Steam control

F Amber temperature light (specic types only: with

red auto-off indication)

G Calc-Clean button

H Temperature dial

I Mains cord

J Heel

K Anti-Calc tablet (specic types only)

L Water tank

Not shown: lling cup



1 Remove any sticker, protective foil or plastic from

the soleplate (Fig. 2).





Do not put perfume, vinegar, starch, descaling agents,

ironing aids or other chemicals in the water tank.

1 Make sure the appliance is unplugged.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2 Set the steam control to position 0 (= no

steam) (Fig. 3).

3 Openthecapofthellingopening.

4 Tilttheironbackwardsandusethellingcuptoll

the water tank with tap water up to the maximum

level. (Fig. 4)

Do not ll the water tank beyond the MAX indication.

5 Closethecapofthellingopening(‘click’).



1 Put the iron on its heel.

2 To set the required ironing temperature, turn the

temperature dial to the appropriate position (Fig. 5).

Check the laundry care label for the required ironing

temperature:

1 for synthetic fabrics (e.g. acrylic, nylon, polyamide,

polyester)

1 for silk

2 for wool

3 for cotton and linen

If you do not know what kind or kinds of fabric an article

is made of, determine the right ironing temperature by

ironing a part that is not visible when you wear or use

the article.

Silk, woollen and synthetic materials: iron the reverse side

of the fabric to prevent shiny patches. To prevent stains,

do not use the spray function.

Start ironing the articles that require the lowest ironing

temperature, such as those made of synthetic bres.

3 Put the mains plug in an earthed wall socket.

The amber temperature light goes on (Fig. 6).

4 When the temperature light goes out, wait a while

before you start ironing.

The temperature light goes on from time to time during

ironing.



Note: The iron may give off some smoke when you use it for

the rst time. This stops after a short while.

Steam ironing

1 Make sure that there is enough water in the water

tank.

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,section‘Settingthe

temperature’).

3 Set the appropriate steam setting. Make sure that

the steam setting is suitable for the set ironing

temperature: (Fig. 7)

1 - 2 for moderate steam (temperature settings 2

to 3)

3 - 4 for maximum steam (temperature settings

3 to MAX)

Note: The iron starts to produce steam as soon as it

has reached the set temperature.

Note: If the selected ironing temperature is too low (MIN

to 2), water may drip from the soleplate (see chapter

‘Features’, section ‘Drip stop’).



1 Set the steam control to position 0 (= no

steam) (Fig. 3).

2 Set the recommended ironing temperature (see

chapter‘Preparingforuse’,section‘Settingthe

temperature’).



Spray function

You can use the spray function at any temperature to

moisten the article to be ironed. This helps remove

stubborn creases.

1 Make sure that there is enough water in the water

tank.

2 Press the spray button several times to moisten the

article to be ironed (Fig. 8).



A powerful steam boost helps to remove very stubborn

creases.

-

-

-

-

,

-

-

The steam boost function can only be used at

temperature settings between 2 and MAX.

1 Press and release the steam boost button (Fig. 9).





The concentrated steam boost from the long vents in

the Steam Tip enhances the distribution of steam into

every part of your garment. The concentrated steam

boost function can only be used at temperature settings

between 2 and MAX.

1 Press and release the steam boost button (Fig. 10).



You can also use the steam boost function when you hold

the iron in vertical position. This is useful for removing

creases from hanging clothes, curtains etc.

1 Hold the iron in vertical position and press and

release the steam boost button (Fig. 11).

Never direct the steam at people.



This iron is equipped with a drip-stop function: the

iron automatically stops producing steam when the

temperature is too low, to prevent water from dripping

out of the soleplate. When this happens you may hear a

sound.





The automatic shut-off function automatically switches off

the iron if it has not been moved for a while.

The red auto-off indication of the temperature light

ashestoindicatethattheironhasbeenswitched

off by the automatic shut-off function (Fig. 6).

To let the iron heat up again:

1 Pick up the iron or move it slightly

The red auto-off indication goes out.

If the temperature of the soleplate has dropped

below the set ironing temperature, the amber

temperature light goes on.

2 If the amber temperature light goes on after you

have moved the iron, wait for it to go out before

you start ironing.

Note: If the amber temperature light does not go on

after you move the iron, the soleplate still has the right

temperature and the iron is ready for use.

Cleaning and maintenance

Cleaning

1 Set the steam control to position 0, remove the

plug from the wall socket and let the iron cool

down.

2 Wipeakesandanyotherdepositsoffthe

soleplate with a damp cloth and a non-abrasive

(liquid) cleaning agent.

To keep the soleplate smooth, avoid hard contact with

metal objects. Never use a scouring pad, vinegar or

other chemicals to clean the soleplate.

3 Clean the upper part of the iron with a damp cloth.

4 Regularly rinse the water tank with water. Empty

the water tank after you have rinsed it (Fig. 12).





The Double-Active Calc System consists of an Anti-Calc

tablet inside the water tank combined with the Calc-

Clean function.

1 The Anti-Calc tablet prevents scale from clogging the

steam vents. This tablet is constantly active and does

not need to be replaced (Fig. 13).

2 The Calc-Clean function removes the scale particles

from the iron.



Use the Calc-Clean function once every two weeks. If

the water in your area is very hard (i.e. when akes come

out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged.

2 Set the steam control to position 0.

,

,

,

4239.000.7171.1

2/10

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ Philips GC3531 مكواة الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Philips. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل Philips GC3531 مكواة الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ مكاوي Philips
المزيد من أدلة مكاوي

الأسئلة المتداولة حول Philips GC3531 مكواة

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

Philips GC188 Classic مكواة

كتيب

مكواة DST6002 Philips

كتيب

مكواة HD1172 Philips

كتيب

Philips GC4711 Azur Ionic مكواة

كتيب

مكواة DST6001 Philips

كتيب

مكواة GC6500 CompactCare Philips

كتيب

Philips GC2996 مكواة

كتيب

Philips GC2147 مكواة

فئات ذات صلة