Home > الاتصالات السلكية واللاسلكية > هواتف > هواتف باناسونيك > هاتف KX-TS520FX باناسونيك

كتيب هاتف KX-TS520FX باناسونيك

هل تحتاج إلى دليل لـ هاتف KX-TS520FX باناسونيك الخاص بك؟ يمكنك أدناه عرض وتنزيل دليل PDF باللغة العربية مجانًا. يحتوي هذا المنتج حاليًا على 0 من الأسئلة الشائعة، و0 من التعليقات، كما حصل على 0 من الأصوات. إذا لم يكن هذا هو الدليل الذي تريده، يرجى الاتصال بنا.

هل منتجك معيب ولا يقدم الدليل أي حل؟ انتقل إلى Repair Café للحصول على خدمات الإصلاح المجانية.

كتيب

1-62, 4-chome, Minoshima, Hakata-ku,

Fukuoka 812-8531, Japan

Things You Should

Know

1-A Controls

5-B Troubleshooting

Press the tabs in the direction of the arrows

(), then remove the wall mounting adaptor

().

To temporarily set the

handset down during a

conversation, place it as

shown here.

8.3 cm

Wall Template

PNQX1358ZA

FM0908YS0

For your future reference

We recommend keeping a record of the following

information to assist with any repair under warranty.

Serial No.

(found on the bottom of the unit)

Date of purchase

Name and address of dealer

Operating Instructions

Integrated Telephone System

Model No.

KX-TS520FX

Please read these operating instructions before

using the unit and save them for future reference.

Accessory information

 Handset . . . . . . . . . . . . . . . . . one

 Handset cord . . . . . . . . . . . . . one

 Telephone line cord . . . . . . . . one

5-C For your safety

2 Tuck the telephone line cord inside the

wall mounting adaptor, and push it in the

direction of the arrow.

 The word “UP WALL” should face upward.

1 Getting Started

1-B Connections

FLASH

AUSE

ABC

DEF

JKL

GHI

MNO

REDIAL

OLU



















Lift the handset and dial the phone number

2 When you ﬁ nish talking, place the handset

on the cradle.

To redial the last number dialed

Lift the handset



Press {REDIAL}.

 {REDIAL} will dial the last number you called

manually, not a One-Touch Dialer number (3-B).

To adjust the receiver volume (6 levels)

Press

{} or {} repeatedly while talking.

 After hanging up, the volume level will be saved.

When a call is being received, the unit rings,

the ringer indicator ﬂ ashes quickly. You can

answer the call by simply lifting the handset.

2-B Answering calls

You can store up to 3 phone numbers in the

one-touch auto dial buttons {M1}, {M2} or {M3}.

Do not press any one-touch auto dial buttons

before storing to prevent misoperation.

1 Lift the handset



Press {PROGRAM}.

Press the one-touch auto dial button

{M1},

{M2} or {M3}

3 Enter a phone number up to 21 digits.

4 Press {PROGRAM}.

5 When ﬁ nished, hang up.

 If a pause is required for dialing, press

{PAUSE} in step 3. A pause stored in a phone

number counts as one digit (4-C).

3-B Dialing a stored number

Lift the handset.

Press the one-touch auto dial button

{M1}, {M2} or {M3}

 {REDIAL} does not work for One-Touch Dialer.

To dial the number again, hang up and repeat steps 1 and 2.

 If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased.

Store phone numbers again, if necessary.

If you misprogram

Hang up



Restart from step 1.

To erase a stored number

Lift the handset



Press {PROGRAM}



the one-touch auto dial button

{M1}, {M2}

or {M3}

of the phone number to be erased



{PAUSE}



{PROGRAM}



Hang up.

Memory sticker

Use the memory sticker as a name or phone

number index for the stored numbers.

4 Special Features

2-A Making calls

5-A Wall mounting

3 Drive screws (not included) into the wall

using the wall template below. Connect the

telephone line cord. Mount the unit and then

slide it down.

4-A For call waiting service

users

4-B Temporary tone dialing

(for rotary/pulse service users)

To use call waiting, you must ﬁ rst subscribe to the call waiting service of your service provider/

telephone company. This feature allows you to receive calls while you are already talking on the

phone. If you receive a call while on the phone, you will hear a call waiting tone.

Press {FLASH} to answer the 2nd call.

To switch between calls, press {FLASH}.

Note:

 Please contact your service provider/telephone company for details and availability of this service in your

area.

You can temporarily switch the dialing mode to tone when you need to access touch-tone

services (for example, answering services, telephone banking services, etc.). Press {*} {TONE}

before entering access numbers which require tone dialing.

4-C Pause

(for PBX/long distance service users)

A pause is sometimes required when making calls using a PBX or long distance service.

Example: If you need to dial the line access number “9” when making outside calls with a PBX:

1 Lift the handset to start calling.

{9}



{PAUSE}

Dial the phone number.

Note:

 A 2.1 second pause is inserted each time {PAU SE} is pressed. Repeat as needed to create longer

pauses.

3-A Storing phone numbers in memory

Problem Cause/solution

The unit does not work.

 Check the connections (1-B).

The call cannot be connected

even if you dialed correctly.

 Check whether the DIALING MODE selector setting is correct or not

(1-B).

The unit does not ring.

 The RINGER selector is set to OFF. Set to HIGH or LOW (1-B).

You cannot store a phone

number in memory.

 Conﬁ rm the handset is off the cradle.

 Do not enter a phone number more than 21 digits long, or the

entered number and the previously stored number will be cleared.

The other party suddenly

cannot hear your voice during

a conversation.

 {PROGRAM} was pressed during the conversation. Press

{PROGRAM} again.

You cannot redial by pressing

{REDIAL}.

 If the last number dialed was more than 31 digits long, the number

will not be redialed correctly.

Liquid or other form of

moisture has entered the unit.

 Disconnect the telephone line cord from the unit. Leave to dry for

at least 3 days. After the unit are completely dry, reconnect the

telephone line cord.

Things You Should

Know

 The ringer indicator will ﬂ ash when

 a telephone number is dialed in PULSE mode,

 someone picks up or hangs up another phone

connected to the same phone line.

This is normal.

2 Making/Answering Calls 3 One-Touch Dialer

3 One-Touch Dialer

Attach your purchase receipt here.



Memory sticker



DIALING MODE

selector



Ringer indicator



RINGER selector



Auto dial {M1},

{M2}, {M3}



{REDIAL}



VOLUME {},

{}



{FLASH}



{PAUS E}



{PROGRAM}



{*} {TONE}

Connect the handset cord (



) to the handset

and the unit. Connect the telephone line

cord until it clicks into the unit and telephone

line jack (



). After line connection, lift the

handset to check for a dial tone.

2 Set the DIALING MODE selector to TONE.

 If you cannot dial,

set to PULSE.

DIALING MODE

PULSETONE

3 Set the RINGER selector to HIGH, LOW or OFF.

(Example : “HIGH” is selected.)

 When set to OFF, the unit

will not ring but the ringer

indicator will still ﬂ ashing.

OFF

HIGH

LOW

RINGER

Connecting a communication device

If you connect a communication device (computer, modem, fax, answering machine, etc.) to

the telephone line, you can connect it through this unit using the DATA jack. After connecting

the handset and telephone line cord, connect the communication device telephone line cord to

the DATA jack.



Make sure the communication device is not in use before using this unit (making calls, storing phone

numbers in memory etc.) or the communication device may not operate properly.

To single-line

telephone jack

Telephone

line cord

Handset

Handset cord

LINE DATA

To prevent severe injury and lost of life/

property, read this section carefully before

using the product to ensure proper and safe

operation of your product.

WARNING

 To prevent the risk of ﬁ re or electrical shock, do

not expose the product to rain or any type of

moisture.

 Do not disassemble the product.

 Do not spill liquids (detergents, cleansers, etc.)

onto the telephone line cord plug, or allow it

to become wet at all. This may cause a ﬁ re.

If the telephone line cord plug becomes wet,

immediately pull it from the telephone wall jack,

and do not use.

CAUTION

 Never install telephone wiring during an electrical

storm.

 Never install telephone line jacks in wet locations

unless the jack is speciﬁ cally designed for wet

locations.

 Never touch uninsulated telephone wires or

terminals unless the telephone line has been

disconnected at the network interface.

 Use caution when installing or modifying

telephone lines.

Important safety instructions

When using your product, basic safety precautions

should always be followed to reduce the risk of ﬁ re,

electric shock and injury to persons, including the

following :

Do not use this product near water, for example,

near bathtub, washbowl, kitchen sink or laundry

tub, in a wet basement or near a swimming pool.

Avoid using a telephone (other than a cordless

type) during an electrical storm. There may be a

remote risk of electric shock from lightning.

Do not use the telephone to report a gas leak in

the vicinity of the leak.

SAVE THESE INSTRUCTIONS

Environment

 The product should be kept free from excessive

smoke, dust, high temperature, and vibration.

 The product should not be exposed to direct

sunlight.

 Do not place heavy objects on top of the product.

 The product should be kept away from heat

sources such as radiators, cookers, etc. It should

not be placed in rooms where the temperature

is less than 5°C or greater than 40°C. Damp

basement should also be avoided.

Routine care

 Wipe the outer surface of the product with a

soft moist cloth.

 Do not use benzine, thinner, or any abrasive

powder.

Notice for product disposal, transfer, or

return

 This product can store your private/conﬁ dential

information. To protect your privacy/conﬁ dentiality,

we recommend that you erase the information

such as one-touch dialer from the memory before

you dispose of, transfer, or return the product.

Screws

8.3 cm

To single-line

telephone jack

(LINE)

Hooks

To communication

device (DATA)

DATA

LINE

Power Source: From telephone line

Dimensions (H x W x D): Approx. 95 mm  190 mm  196 mm

Mass (Weight): Approx. 518 g

Operating conditions: 5°C–40°C, 20 %–80 % relative air humidity (dry)

Note:

 Design and speciﬁ cations are subject to change without notice.

 The illustrations in these instructions may vary slightly from the actual product.

5-D Speciﬁ cations

Things You Should Know

Note:

 This equipment is designed for use in Czech

Republic, Slovakia and Turkey.

 In the event of problems, you should contact your

equipment supplier in the ﬁ rst instance.

Declaration of Conformity:

 Panasonic Communication Co., Ltd. declares that

this equipment is in compliance with the essential

requirements and other relevant provisions of

Radio & Telecommunications Terminal Equipment

(R&TTE) Directive 1999/5/EC. Declarations of

Conformity for the relevant Panasonic products

described in this manual are available for

download by visiting:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

This material is copyrighted by Panasonic

Communications (Malaysia) Sdn. Bhd., and

may be reproduced for internal use only.

All other reproduction, in whole or in part,

is prohibited without the written consent of

Panasonic Communications (Malaysia) Sdn.

Bhd.

PNQX1358ZA.indd 1PNQX1358ZA.indd 1 11/11/2008 5:20:57 PM11/11/2008 5:20:57 PM

التقييم

‫قم بإخبارنا عن رأيك في هاتف KX-TS520FX باناسونيك عن طريق ترك تقييم للمنتج. هل تريد أن تشارك بتجاربك مع هذا المنتج أو طرح سؤال ما؟ يرجى ترك تعليق في أسفل الصفحة.

هل أنت راض عن هاتف KX-TS520FX باناسونيك؟
نعم لا

كن أول من يقيم هذا المنتج

0 الأصوات