كتيب ماكينة تجليخ دوارة G24ROS Greenworks

كتيب

EN

DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET

English (Original Instructions)

3

Replacing the Sanding Sheet (see gure B-C)

To remove the sanding sheet 10, lift it from the side and

pull it off of the sanding plate 6.

When attaching a new sanding sheet, remove any dust or

debris from the sanding plate 6, e. g., with a brush.

The surface of the sanding plate 6 is fitted with Velcro

backing for quick and easy fastening of sanding sheets

with Velcro adhesion.

Press the sanding sheet 10 rmly against the bottom side

of the sanding plate 6.

To ensure optimum dust extraction, pay attention that the

punched holes in the sanding sheet match with the holes

in the sanding plate.

The dust box (alignment aid) 11 can be used for alignment

of the sanding sheet 10 on the sanding plate 6. Place

the sanding sheet with the Velcro facing upward on the

alignment aid. Press the cams of the alignment aid into

two holes of the sanding plate and roll off the sanding

sheet from the alignment aid. Press the sanding sheet

rmly against the sanding plate.

Note: A correctly positioned sanding sheet is required to

ensure low vibration of the power tool during operation.

Selection of the Sanding Plate

Depending on the application, the machine can be

equipped with sanding plates of different hardness:

– Sanding plate, medium (black): Suitable for all

sanding work; universally usable.

– Sanding plate, soft (grey, accessory): Suitable for

intermediate and fine sanding, incl. on convex

surfaces.

Replacing the Sanding Plate (see gures D–E)

Note: Replace a damaged sanding plate 6 immediately.

Pull off the sanding sheet or the polishing accessory.

Unscrew the four screws 12 completely and remove the

sanding plate 6.

Clean the upper side of the new sanding plate 6. Apply a

thin coat of synthetic grease to the outer ring hatched grey

in the gure.

Attach the new sanding plate 6 and tighten the four

screws again.

Note: A damaged sanding-plate base 13 may be changed

only by an authorised after-sales service agent for power

tools.

Dust/Chip Extraction

■ Dust from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful

to one’s health. Touching or breathing-in the dust can

cause allergic reactions and/or lead to respiratory

infections of the user or bystanders.

Certain dust, such as oak or beech dust, is considered

carcinogenic, especially in connection with wood-

treatment additives (chromate, wood preservative).

Materials containing asbestos may only be worked by

specialists.

– As far as possible, use a dust extraction system

suitable for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 lter-class

respirator.

Observe the relevant regulations in your country for

the materials to be worked.

■ Prevent dust accumulation at the workplace. Dust can

easily ignite.

Integrated Dust Extraction with Dust Box(see

gures F-G)

To empty the dust box assembly 5, pull dust box 11 off

the power tool by squeezing both sides of dust box 11.

Empty the dust box 11and clean the dust box 11 with a

Selecting the Sanding Sheet

Select a sanding sheet with the appropriate grain as required for the desired surface removal rate. Greenworks sanding

sheets are suitable for paint, wood and metal.

Operational area Application Grain size

Removal

(coarse

sanding)

− Coarse sanding down

material removal

− Removal of old paint

− Sanding old paint, varnish and ller extra coarse 40

− Removal of thin coats

− Pre-sanding rough, unplaned surfaces

coarse 60

Preparation

(intermediate

sanding)

− Light sanding down

− Light sanding of surfaces for

continued processing

− Face sanding and planing of irregularities

− Removing score marks from coarse-

sanding

medium 80

− Evening out/touching up before applying

paint/varnish

ne 120

Fine

Sanding

− Intermediate varnish sanding

− Light sanding of coating defects

− Removal of bres from surfaces

− Fine sanding before staining or glazing

very ne 180

− Light sanding of primer prior to coating extra ne 240

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ ماكينة تجليخ دوارة G24ROS Greenworks الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Greenworks. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل ماكينة تجليخ دوارة G24ROS Greenworks الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ ماكينات تجليخ دوارة Greenworks
المزيد من أدلة ماكينات تجليخ دوارة

الأسئلة المتداولة حول ماكينة تجليخ دوارة G24ROS Greenworks

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

بلاك اند ديكر KA330 ماكينة تجليخ دوارة

كتيب

بوش GSS 230 A ماكينة تجليخ دوارة

كتيب

ماكينة تجليخ دوارة MR-38CV Mirka

كتيب

ماكينة تجليخ دوارة 7347 AA Skil

كتيب

ماكينة تجليخ دوارة BS-300N Bort

كتيب

ماكينة تجليخ دوارة 7445 AA Skil

كتيب

Far Tools AJ 150C ماكينة تجليخ دوارة

كتيب

ماكينة تجليخ دوارة 7455 AA Skil

فئات ذات صلة