كتيب غسالة تعمل بالضغط DPW-2000-SC Defort

كتيب

10

GB

- ACCIDENT HAZARD.

DO NOT leave the cleaner unattended.

- SHORT CIRCUIT HAZARD.

DO NOT move the cleaner by pulling on the electrical

cable.

SAFETY “MUSTS”

- SHORT CIRCUIT HAZARD.

All electrical conductors MUST BE PROTECTED

against the water jet.

- ELECTRIC SHOCK HAZARD.

The cleaner MUST ONLY BE CONNECTED to a

correctly earthed power supply.

- Use a Residual Current Device (RCD) of not more

than 30 mA, at the plug socket when using this appli-

ance.

- INJURY HAZARD.

The high pressure may cause materials to bounce

off surfaces at speed; therefore protective clothing

and safety goggles MUST BE WORN.

- ACCIDENTAL START-UP HAZARD.

Before doing work on the cleaner, REMOVE the

plug.

- INJURY HAZARD.

Before pressing the trigger, GRIP the gun fi rmly to

counteract the recoil.

- CONTAMINATION HAZARD.

COMPLY WITH the requirements of the local water

supply company. According to DIN 1988, power-jet

cleaners may only be connected to the mains drink-

ing water supply if a backfl ow preventer valve with

drain facility is installed in the supply hose.

- ACCIDENT HAZARD.

Maintenance and/or repair of electrical components

MUST be carried out by qualifi ed staff.

- INJURY HAZARD.

DISCHARGE residual pressure before

disconnecting the cleaner hose.

- ACCIDENT HAZARD.

Before using the cleaner, CHECK every time that

the screws are fully tightened and that there are no

broken or worn parts.

- EXPLOSION AND ELECTRIC SHOCK HAZARD.

Only USE detergents which will not corrode the

coating materials of the high pressure hose/electri-

cal cable.

- INJURY HAZARD.

ENSURE that all people or animals keep a minimum

distance of 16 yd. (15m) away.

SAFETY VALVE

The safety valve also functions as a pressure limiting

valve. When the gun trigger is released, the safety

valve opens and the water recirculates through the

pump inlet.

3. ASSEMBLY

CONNECTING THE HOSE

AND TRIGGER ASSEMBLY 1 2

● Before connecting any hoses or trigger/ lance

assembly fi rst check all connections to ensure they

are free from any blockage.

must be proportional to their length, i.e. the longer

the extension cable, the greater the cross-section;

cables with a protection level of “IPX5” must be

used.

● Position the cleaner AS NEAR POSSIBLE to the wa-

ter supply.

● The packaging is easily recyclable, and must be dis-

posed of in compliance with the regulations in force

in the country of installation.

● Use the cleaner only with accessories and replace-

ment parts authorized by the manufacturer. The use

of original accessories and replacement parts will

ensure safe, trouble-free operation.

● The cleaner must be used standing on a secure, sta-

ble surface.

● Avoid unintentional fi ring of the trigger. Do not carry

the lance/ trigger assembly with your hand over the

trigger. Always use the trigger lock mechanism.

● Ensure that the safety lock on the trigger is used,

when you have stopped using the pressure washer

to prevent accidental operation. (fi g 5)

SAFETY “MUST NOTS”

- EXPLOSION OR POISONING.

DO NOT use the cleaner with infl ammable or toxic

liquids, or any products which are not compatible

with the correct operation of the cleaner.

- INJURY HAZARD.

DO NOT direct the water jet towards people or ani-

mals.

- ELECTRIC SHOCK HAZARD.

DO NOT direct the water jet towards the unit itself,

electrical parts or towards other electrical equip-

ment.

- SHORT CIRCUIT HAZARD.

DO NOT use the cleaner outdoors in case of rain.

- INJURY HAZARD.

DO NOT allow children or incompetent persons to

use the cleaner.

- ELECTRIC SHOCK HAZARD.

DO NOT touch the plug and/or socket with wet

hands.

- ELECTRIC SHOCK AND SHORT CIRCUIT HAZ-

ARD.

DO NOT use the cleaner if the electrical cable is

damaged.

- EXPLOSION HAZARD.

DO NOT use the cleaner if the high pressure hose is

damaged.

- ACCIDENT HAZARD.

DO NOT jam the trigger in the operating position.

- ACCIDENT HAZARD.

Check that the data plates are affi xed to the cleaner, if

not, inform your dealer. Cleaners without plates must

NOT be used as they are unidentifi able and potentially

dangerous.

- EXPLOSION HAZARD.

DO NOT tamper with or alter the calibration of the

safety valve.

- HAZARDOUS ALTERATION OF OPERATING PER-

FORMANCE.

DO NOT alter the original diameter of the spray

head nozzle.

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ غسالة تعمل بالضغط DPW-2000-SC Defort الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Defort. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل غسالة تعمل بالضغط DPW-2000-SC Defort الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ غسالات تعمل بالضغط Defort
المزيد من أدلة غسالات تعمل بالضغط

الأسئلة المتداولة حول غسالة تعمل بالضغط DPW-2000-SC Defort

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

غسالة تعمل بالضغط DPW-1800-VAC Defort

كتيب

غسالة تعمل بالضغط DPW-1650 Defort

كتيب

غسالة تعمل بالضغط DPW-1850 Defort

كتيب

غسالة تعمل بالضغط K2 Basic Kärcher

كتيب

بلاك اند ديكر PW1600SL غسالة تعمل بالضغط

كتيب

غسالة تعمل بالضغط K 2.325 Kärcher

كتيب

غسالة تعمل بالضغط AQT 45-14 X بوش

كتيب

غسالة تعمل بالضغط HDR 9013 CB Bomann

فئات ذات صلة