كتيب كاندي CDG5T7518CS KSA فريزر ثلاجة

كتيب

4

After the refrigerator is properly installed and well cleaned, do not switch it on immediately. Make sure to energize the

refrigerator after more than 1 hour of standing, so as to ensure its normal operation.

2. Cleaning

Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.

3. Power-on

Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the temperature inside the

freezer compartment drops obviously, it indicates the refrigeration system is working normally.

4. Storage of food

After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be automatically controlled

according to the user’s temperature setting. After the refrigerator is fully cooled, put in foods, which usually need 2~3 hours

to be fully cooled. In summer, when the temperature is high, it takes more than 4 hours for the foods to be fully cooled (Try

to open the refrigerator door as less as possible before the internal temperature cools down).

If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and leakage circuit

breaker are normal. If vibration noises are produced due to the refrigerator contacting the wall or if the wall gets blackened

by air convection around the compressor, move the refrigerator away from the wall. Setting up the refrigerator may cause

jamming noise or image chaos to the mobile phone, fixed-line telephone, radio receiver, television set surrounding it, so try

to keep the refrigerator as far away as possible in such case.

Functions

START

The display panel is designed on the freezer door, illustrated as the figure below:

Function Setting

When the refrigerator system is connected to power supply for the first time, all icons on the

display panel gets illuminated, which will restore to the normal display in 2s. When all the

doors get closed, the display will light off automatically if no key operation within 3 minutes.

When the display is off, it will light up if any door gets opened or any key is pressed.

The following key operations are valid only when keys are unlocked and gets illuminated on

the display.

“Inverter” is the frequency conversion indicator. When the power is turned on, it lights up

when the compressor is working.

1.Functions

1.1 Temp. setting

1）Fridge temperature setting

Press the “Temp Zone” key until the icon of fridge zone gets illuminated, with the fridge

temperature displayed, and then press the “Temp” key to adjust the fridge temperature to

the expected temperature value, finally press the "OK" key to validate the setting.

The fridge temperature setting cycles as following:

5→6→7→8→OF→2→3→4→5

‘OF’ represents the OFF state, and when the OF setting takes effect, the fridge will be shut off,

with no refrigeration request.

Be sure to take out all the foods in the fresh food compartment before setting this function.

2）Freezer temperature setting

Press the “Temp Zone” key until the icon of freezer zone gets illuminated, with the freezer

temperature displayed, and then press the “Temp” key to adjust the freezer temperature to

the expected temperature value, finally press the "OK" key to validate the setting.

The freezer temperature setting cycles as following:

-18→-17→-16→-24→-23→-22→-21→-20→-19→-18；

1.2 Fast Freezing

1) When the Fast-Freezing function is enabled, the freezer temperature will be controlled at -

32℃ automatically, and after 26 hours of running, the Fast-freezing function gets exited.

Cooling down the freezer temperature in a rapid manner is good for the prevention against

food nutrition loss and the preservation of freshness.

When the fast-freezing function is active, the freezer temperature is subject to no change.

2) To enter “Fast Freezing”.

 Press the “Function” key until the icon of “Fast Freezing” starts flickering, and then press the “OK” key within 5

seconds to validate the setting; if the “OK” key is not pressed within 5s, the setting will restore to the one that is set

before the fast-freezing function is enabled.

3) To exit “Fast Freezing”.

 After a cumulative running period of 26 hours, the fast-freezing function will exit automatically.

 When the fast-freezing function is active, press the “Function” key until the icon of “Fast Freezing” gets flickering, and

then press the “OK” key within 5 second to validate the setting, with the fast-freezing function disabled.

 When the ECO function is enabled, the fast-freezing function will be disabled automatically.

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ كاندي CDG5T7518CS KSA فريزر ثلاجة الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Candy. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل كاندي CDG5T7518CS KSA فريزر ثلاجة الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ Candy فريزرات ثلاجات
المزيد من أدلة فريزرات ثلاجات

الأسئلة المتداولة حول كاندي CDG5T7518CS KSA فريزر ثلاجة

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

كاندي CBT3518FWK فريزر ثلاجة

كتيب

كاندي CDG5T718CS KSA فريزر ثلاجة

كتيب

كاندي CBT3518EW فريزر ثلاجة

كتيب

كاندي CCE4T620EW فريزر ثلاجة

كتيب

كاندي CCDN-470S-19 فريزر ثلاجة

كتيب

كاندي CCDNI-630DS-19 فريزر ثلاجة

كتيب

كاندي CCE3T620FS فريزر ثلاجة

كتيب

كاندي CCE4T618EX فريزر ثلاجة

فئات ذات صلة