كتيب مروحة SF300R Campomatic

كتيب

13

15

16

14

3 SPEED OSCILLATING STAND FAN

SF300R

OPERATING INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

CAUTION

Read Rules for Safe Operation and Instructions Carefully.

WARNING

1. Keep electrical appliances out of reach from Children or infirm persons. Do not let them use the appliances without

supervision.

2. Ensure that the fan is switched off from the supply mains before removing the guard.

3. If the supply cord is damaged, it must be replaced by manufacturer or its service agent or a similarly qualified person in order

to avoid a hazard.

RULES FOR SAFE OPERATION

1. Never insert fingers, pencils, or any other object through the guard when fan is running.

2. Disconnect fan when moving from one location to another.

3. Disconnect fan when rem

oving grilles for cleaning.

4. Be sure fan is on a stable surface when operating to avoid overturning.

5. DO NOT use fan in window. Rain may create electrical hazard.

PART NAMES

1.Front guard 2.Spinner 3.Blade 4.Plastic sleeve

5.Plastic Nut 6.Rear guard 7.Motor shaft

8.Clutch knob 9.Motor housing 10.Tilt adjustment knob

11.Fan body 12.Piano key 13.Extension

14.Height adjustment ring 15.Height Adjuster 16.Base

COLUMN ASSEMBLY

1. Attach column to stand with 4 screws as shown.

2. Unscrew / take out height adjustment ring.

3. Slide stand ornament down the column to rest on stand.

4. Pull out the extension pipe a

nd screw/fasten the height

adjustment ring back.

CAUTION:

Height adjustment ring must be fully fastened before the

assembly of the motor section to the stand.

ASSEMBLY INSTRUCTIONS

1. Unscrew the spinner clockwise and the nut counter clockwise

to remove both of them.

2. Set the rear guard in the proper position with handle up.

3. Screw on plastic nut tightly to attach rear guard.

4. Discard plastic sleeve on motor shaft.

5. Install the blade onto the shaft until it reaches the retaining pin.

6. Screw spinner onto motor shaft counter clockwise to blade.

7. Press the rim of the front guard onto the rear guard Intel the front guard is properly fitted. Secure both g

uards firmly by

tightening the fan guard locking screws and nuts.

OPERATING INSTRUCTIONS

1. Push down/pull up the clutch knob to control oscillation.

2. The airflow can be adjusted upward or downward by loosening the tilt adjustment knob and adjusting the vertical angle as

desired, retighten knob securely.

3. The height of the fan can be adjusted by loosening the height adjustment ring carefully raising or lowering the fan and firmly

retightening the ring.

4. Speed is controlled by pressing the piano keys.

5. Plug the power cord supply into a wall outlet.

CLEANING

1. Be sure to unplug from the electrical supply source before cleaning.

2

. Plastic parts should be cleaned with mild soap and damp cloth or sponge. Thoroughly remove soap film with clean water.

3. Be sure not to make water or other liquid into the motor.

التقييم

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ مروحة SF300R Campomatic الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Campomatic. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل مروحة SF300R Campomatic الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

كافة الأدلة لـ مراوح Campomatic
المزيد من أدلة مراوح

الأسئلة المتداولة حول مروحة SF300R Campomatic

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

منتجات ذات صله

كتيب

مروحة BF1200 Campomatic

كتيب

Clatronic TVL 3770 مروحة

كتيب

Camry CR 7929 مروحة

كتيب

Adler AD 7857 مروحة

كتيب

Clatronic VL 3603 S مروحة

كتيب

Gerlach GL 7927 مروحة

كتيب

Proficare PC-TVL 3068 مروحة

كتيب

Proficare PC-VL 3069 LB مروحة

فئات ذات صلة