كتيب Bertazzoni PRO905GGVLXE بوتاجاز

هل تحتاج إلى دليل لـ Bertazzoni PRO905GGVLXE بوتاجاز الخاص بك؟ يمكنك أدناه عرض وتنزيل دليل PDF باللغة العربية مجانًا. يحتوي هذا المنتج حاليًا على 8 من الأسئلة الشائعة، و0 من التعليقات، كما حصل على 0 من الأصوات. إذا لم يكن هذا هو الدليل الذي تريده، يرجى الاتصال بنا.

هل منتجك معيب ولا يقدم الدليل أي حل؟ انتقل إلى Repair Café للحصول على خدمات الإصلاح المجانية.

كتيب

Loading…

4
Table 2 (model with gas oven and gas grill with double controls)
Oven
Natural G20
20
130
-
314
3,30
2838
Butane G30
30
78
240
-
3,30
2838
Propane G31
37
78
236
-
3,30
2838
Grill
Natural G20
20
108
-
191
2
1720
Butane G30
30
72
145
-
2
1720
Propane G31
37
72
143
-
2
1720
Table 3 (model with gas oven and gas grill with single control, or gas oven and electric grill)
Oven
Natural G20
20
155
-
429
4,50
3870
Butane G30
30
105
327
-
4,50
3870
Propane G31
37
105
321
-
4,50
3870
Grill
Natural G20
20
108
-
191
2
1720
Butane G30
30
72
145
-
2
1720
Propane G31
37
72
143
-
2
1720
BURNER ADJUSTMENT
1) Burner "MINIMUM" adjustment:
Work surface burner adjustment: follow the instructions below to adjust the work surface burner minimum:
1) Light the burner and set the knob to the MINIMUM position (small flame).
2) Remove the knob of the valve that is press fit on the rod of that valve.
3) If the cooker is not equipped with safety valves on the surface burners, insert a small slotted screwdriver into the hole on the
valve rod (Fig. 8) and turn the choke screw to the right or left until the burner flame is adjusted to minimum. If the cooker is
equipped with safety valves, the choke valve is not located in the rod hole, but on the valve body (see fig. 9).
4)For the gas valve of dual burner the choke valve is located on the valve body (fig.10), the A screw adjust the outer ring,
the B screw adjust the inner ring.
5) Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position.
Oven burner adjustment: follow the instructions below to adjust the minimum:
1) Light the burner setting the knob to the MAXIMUM position.
2) Close the oven door and operate the oven for at least 10 minutes.
3) Set the knob to the MINIMUM position (corresponding to 120°) and then remove it.
4) With a slotted screwdriver turn the choking screw (see figure 11) and, while observing the flame at the same time through the
cooker porthole, evaluate the consistency of the flame so it remains on when switching quickly from the MINIMUM to the
MAXIMUM position.
Grill burner adjustment: follow the instructions below to adjust the minimum:
1) Light the burner setting the knob to the MAXIMUM position.
2) Close the oven door and operate the oven for at least 10 minutes.
3) Set the knob to the MINIMUM position (small flame) and then remove it.
4) If the cooker is not equipped with safety valves on the surface burners, insert a small slotted screwdriver into the hole on the
valve rod (Fig. 8) and turn the choke screw to the right or left, while observing the flame at the same time through the cooker
porthole, evaluate the consistency of the flame so it remains on when switching quickly from the MINIMUM to the MAXIMUM
position. If the cooker is equipped with safety valves, the choke valve is not located in the rod hole, but on the valve body (see
figure 9).
WARNING: The above-mentioned adjustment should be made only with natural gas burners, while for those operating
with liquid gas the screw must be locked at the end in a clockwise direction.
WARNING: For the model with single control for grill and oven, the grill burner always operates at maximum and
therefore no minimum adjustment is required.
APPLIANCE ELECTRIC CONNECTION:
The electric connection must comply with the current legal standards and regulations.
Before making the connection, check that:
- The system electrical rating and the current outlets are adequate for the maximum power output of the appliance (see the label
applied to the bottom of the casing).
- The outlet or the system is equipped with an efficient ground connection in accordance with the current legal standards and
regulations. The company will not be responsible for the non-compliance with these instructions.
When the connection to the power supply network is made using an outlet:
- If the power cord is supplied without a plug, apply a standard plug that is suitable for the load indicated on the label. Connect
the wires according to the diagram shown in Fig.12 and check that:
letter L (phase) = brown wire;
letter N (neutral) = blue wire;
ground symbol = green-yellow wire;
- The power cord must be positioned so that an overtemperature of 75 K will not be reached at any point.
- Do not use reductions, adapters or splitters since they might cause false contacts and lead to dangerous overheating.
When the connection is made directly to the electric network:
- Insert an omnipolar circuit-breaker between the appliance and the network which is sized for the appliance load with a
minimum opening between the contacts of 3 mm.
- Remember that the ground wire must not be interrupted by the circuit-breaker.
- As an alternative, the electric connection can also be protected by a high-sensitivity residual current circuit-breaker.
- It is highly recommended to attach the special green-yellow ground wire to an efficient ground system.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service
agent.
قم بتنزيل الكتيب الدليلي بالعربية (PDF, 2.77 MB)
(عليك الاهتمام بالبيئة وقم بطبع هذا الكتيب الدليلي فقط إذا كان ذلك ضروريا بالفعل)

Loading…

التقييم

‫قم بإخبارنا عن رأيك في Bertazzoni PRO905GGVLXE بوتاجاز عن طريق ترك تقييم للمنتج. هل تريد أن تشارك بتجاربك مع هذا المنتج أو طرح سؤال ما؟ يرجى ترك تعليق في أسفل الصفحة.
هل أنت راض عن Bertazzoni PRO905GGVLXE بوتاجاز؟
نعم لا
كن أول من يقيم هذا المنتج
0 الأصوات

انضم للمحادثة المتعلقة بهذا المنتج

هنا يمكنك مشاركة رأيك حول Bertazzoni PRO905GGVLXE بوتاجاز. إذا كان لديك سؤال، فاقرأ الدليل بعناية أولاً. يمكن طلب الدليل باستخدام نموذج الاتصال الخاص بنا.

المزيد عن دليل المستخدم هذا

نحن ندرك أنه من الجيد أن يكون لديك دليل ورقي لـ Bertazzoni PRO905GGVLXE بوتاجاز الخاص بك. يمكنك دائمًا تنزيل الدليل من موقعنا الإلكتروني وطباعته بنفسك. إذا كنت ترغب في الحصول على الدليل الأصلي، فنوصيك بالاتصال بـ Bertazzoni. قد يكون بمقدورهم تقديم دليل أصلي. هل تبحث عن دليل Bertazzoni PRO905GGVLXE بوتاجاز الخاص بك بلغة مختلفة؟ اختر لغتك المفضلة على صفحتنا الرئيسية وابحث عن رقم الطراز لمعرفة ما إذا كان متوفرًا لدينا.

تحديد

الاسم التجاري Bertazzoni
نموذج PRO905GGVLXE
فئة بوتاجازات
نوع الملف PDF
حجم الملف 2.77 MB

كافة الأدلة لـ Bertazzoni بوتاجازات
المزيد من أدلة بوتاجازات

الأسئلة المتداولة حول Bertazzoni PRO905GGVLXE بوتاجاز

يبحث فريق الدعم لدينا عن معلومات مفيدة عن المنتج وإجابات على الأسئلة المتكررة. وإذا وجت عدم دقة في أسئلتنا المتكررة، فيرجى إخبارنا بذلك عن طريق استخدام استمارة الاتصال بنا.

لماذا يصدر الإشعال في النطاق الخاص بي صوت نقرة؟ تم التحقق

إذا تم تنظيف النطاق بالكثير من الماء ، فقد تكون المقابض قد تبللت ، مما أدى إلى الاشتعال. دع المقابض تجف. إذا استمرت المشكلة ، يجب عليك الاتصال بالشركة المصنعة.

كان ذلك مفيدا (1087) اقرأ أكثر

الفرن في النطاق الخاص بي لا يسخن بدرجة كافية ، ماذا أفعل؟ تم التحقق

يتأكد منظم الحرارة من ارتفاع درجة حرارة الأفران إلى درجة الحرارة المحددة. من المحتمل أن يكون منظم الحرارة معيبًا. استبدله. إذا كنت في شك ، اتصل بالشركة المصنعة.

كان ذلك مفيدا (1052) اقرأ أكثر

ما هي المقالي التي يمكن استخدامها في نطاق الحث؟ تم التحقق

بشكل عام ، يمكن استخدام جميع المقالي الممغنطة في نطاق الحث. جميع المقالي الجديدة تقريبًا مناسبة للتحريض.

كان ذلك مفيدا (861) اقرأ أكثر

النطاق الخاص بي به قابس طاقة لا يتناسب مع المقبس العادي ، فماذا أفعل؟ تم التحقق

العديد من النطاقات الكهربائية (السيراميك والحث) لها قابس مختلف. هذا لأن هذه الأجهزة تتطلب الكثير من الطاقة. قم بتركيب الجهاز بواسطة متخصص.

كان ذلك مفيدا (463) اقرأ أكثر

ما هو الانحلال الحراري؟ تم التحقق

بعض الأفران مجهزة بوظيفة الانحلال الحراري. هذا نظام تنظيف يحرق الأوساخ والدهون في الفرن باستخدام درجات حرارة عالية جدًا. بعد الانحلال الحراري ، ستتحول كل الأوساخ إلى رماد ويمكن إزالتها بسهولة. إذا كان الفرن يحتوي على وظيفة الانحلال الحراري ، فمن المستحسن استخدامه 3 إلى 4 مرات في السنة للحفاظ على نظافة الفرن.

كان ذلك مفيدا (403) اقرأ أكثر

هل يمكنني توصيل نطاق بسلك تمديد؟ تم التحقق

لا يمكن توصيل الأجهزة التي تتطلب كميات كبيرة من الطاقة ، مثل النطاق ، بجميع أسلاك التمديد. تعرف على استخدام الطاقة في النطاق ، والمشار إليه في Watt ، وتحقق مما إذا كان سلك التمديد يمكنه التعامل مع هذا. توجد أسلاك تمديد بكابلات أكثر سمكًا تم تصنيعها للتعامل مع الأجهزة الأكبر حجمًا.

كان ذلك مفيدا (207) اقرأ أكثر

هل يمكنني تحضير عدة أصناف في وقت واحد باستخدام المزيد من صواني الشواء؟ تم التحقق

من الناحية الفنية هذا ممكن. ومع ذلك ، فإنه يعتمد على نوع الطعام إذا كنت بحاجة إلى ضبط وقت التحضير أو تبديل الصواني في منتصف الطريق أثناء التحضير.

كان ذلك مفيدا (191) اقرأ أكثر

عندما أستخدم الفرن ، غالبًا ما يكون هناك بقايا طعام تسقط في القاع ، مما يتسبب في دخان. كيف يمكنني منع ذلك؟ تم التحقق

تأتي العديد من الأفران مع شبكة وصينية خبز. عندما يتم تحضير الطعام على الشبكة ، يمكن وضع صينية الخبز في الأسفل لمنع بقايا الطعام من الاحتراق والتسبب في الدخان.

كان ذلك مفيدا (189) اقرأ أكثر
كتيب Bertazzoni PRO905GGVLXE بوتاجاز

منتجات ذات صله

فئات ذات صلة